Our anti-static ESD swabs are a very good substitute for ITW Texwipe swabs. All the test parameters and technical indicators are in line with the requirement of the Hard Disk industry, free from silicone, amides or DOP, low in both particles and ion content, it also can be used with 99.9% industry IPA .
CM-FS712 are constructed from compressed ,100 ppi(Z) open-cell polyurethane foam that is free from organic contaminants such as silicone ,amide or DOP . The pointed ,non-abrasive foam head is designed for cleaning small ,slotted areas . Our handle material is ESD-safe polypropylene , it has excellent ESD performance . And the excellent cleaning is controlled and supported flexible paddle . Laundered and packed under an ISO Class 4 Cleanroom, The foam exhibits low particulate and ionic content. It has excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity .
CM-FS712 Cleanroom ESD Foam Swabs
-Head width: 11 mm
-Head thickness: 7.0 mm
-Head length: 25 mm
-Handle width: 5.2 mm
-Handle length: 97 mm
-Total length: 122 mm
CM-FS742 Anti-static Cleanroom Foam Swabs
-Head width: 3.6 mm
-Head thickness: 3.5 mm
-Head length: 12 mm
-Handle width: 3.0 mm
-Handle length: 59 mm
-Total length: 71 mm
CM-FS750 Anti-staticCleanroom Foam Swabs
-Head width: 3.2 mm
-Head thickness: 3.2 mm
-Head length: 10 mm
-Handle width: 2.5 mm
-Handle length: 66 mm
-Total length: 76 mm
-Free from silicone, amide and DOP
-Low non-volatile residue
-Low in both particles and ion content
-Excellent solvent-holding capacity
-Compatible with most common solvents
-No contaminating adhesives or coatings.
1.The 100ppi open-cell sponge or polyester head have excellent absorbency and cleaning affect.
2.The polypropylene handle has excellent ESD performance ,it can protect the sensitive components or parts .And the handle won’t produce any particle when it is using.
-Effectively clean small slotted. recessed areas
-Remove flux residue and excess material
-Use in the cleaning static sensitive components parts
-Used in the electronics, semiconductor, hard disk drive, LCD,PCB,SMT, IC, medical and biotech industry
We have chosen the 3 most suitable types for PCB/BGA cleaning using these excellent and durable foam swabs.
You will get 10 pieces of each of the types that have been described above. These three shapes will allow the rework engineer to clean the PCB or BGA better than ever and avoid contamination of the surfaces and minimise the possibility of contaminating the solder alloy during reballing. The large head cleaning swab can clean large areas effectively and gently and is durable. The small rounded and the pointed head swabs will allow you to clean between tightly packed SMD components of flux residues easily and effectively. Satisfaction guaranteed.